[ NDCRT ]

Site Features
About NDCRT
Site News
Site Map
Hosted Sites
Acceptable Use
-----------

Emergency Resources
Quick Reference
Data Reference
Offsite Links
WA Emg Svc Map
Authors
Emergency News
Legal News
Search Engine
Computer Support
-----------

Interact
Conferences
SFD Honored Members
Feedback
-----------

Advertisement
OReilly
-----------




  
 Common Name:    Antimony Pentachloride  
 CAS Number:     7647-18-9 
 DOT Number:     UN 1730 (Liquid)/UN 1731 (Solutions) 
 Date:           August 1, 1987 
 ----------------------------------------- 
 
 HAZARD SUMMARY 
 *    Antimony Pentachloride can affect you when breathed in and by 
      passing through your skin. 
 *    Exposure can cause sore throat, rash, poor appetite and 
      irritate the lungs. Higher levels can cause a build-up of 
      fluid, or irregular heartbeat which can cause death. 
 *    High or repeated exposure may damage the liver and the heart 
      muscle. 
 *    If used near acid, a deadly gas (Stibine) can be formed. 
 *    Antimony may contain Arsenic. 
 *    It is a CORROSIVE Chemical. Contact can burn the skin or eyes. 
 
 IDENTIFICATION 
 Antimony Pentachloride is a colorless to reddish-yellow, oily 
 liquid with an offensive odor. It is used in dyeing, coloring 
 metals and in many organic chemical reactions. 
 
 REASON FOR CITATION 
 *    Antimony Pentachloride is on the Hazardous Substance List 
      because it is regulated by OSHA and cited by ACGIH, DOT, NIOSH 
      and NFPA. 
 *    This chemical is on the Special Health Hazard Substance List 
      because it is CORROSIVE. 
 
 HOW TO DETERMINE IF YOU ARE BEING EXPOSED 
 *    Exposure to hazardous substances should be routinely 
      evaluated. This may include collecting personal and area air 
      samples. You can obtain copies of sampling results from your 
      employer. You have a legal right to this information under 
      OSHA 1910. 20. 
 *    If you think you are experiencing any work-related health 
      problems, see a doctor trained to recognize occupational 
      diseases. Take this Fact Sheet with you. 
 ----------------------------------------- 
 
 WORKPLACE EXPOSURE LIMITS 
 These exposure limits are recommended for Antimony and compounds as 
 Stibine. 
 
 OSHA:     The legal airborne permissible exposure limit (PEL) is 
           0.5 mg/m3 averaged over an 8-hour workshift.  
 NIOSH:    The recommended airborne exposure limit is 0.5 mg/m3 
           averaged over 10-hour workshift.  
 ACGIH:    The recommended airborne exposure limit is 0.5 mg/m3 
           averaged over an 8-hour workshift. 
 
 *    The above exposure limits are for air levels only. When skin 
 contact also occurs, you may be overexposed, even though air levels 
 are less than the limits listed above. 
 
 WAYS OF REDUCING EXPOSURE 
 *    Where possible, enclose operations and use local exhaust 
      ventilation at the site of chemical release. If local exhaust 
      ventilation or enclosure is not used, respirators should be 
      worn. 
 *    Wear protective work clothing. 
 *    Wash thoroughly immediately after exposure to Antimony 
      Pentachloride and at the end of the workshift. 
 *    Post hazard and warning information in the work area. In 
      addition, as part of an ongoing education and training effort, 
      communicate all information on the health and safety hazards 
      of Antimony Pentachloride to potentially exposed workers.  
 
 This Fact Sheet is a summary source of information of all potential 
 and most severe health hazards that may result from exposure. 
 Duration of exposure, concentration of the substance and other 
 factors will affect your susceptibility to any of the potential 
 effects described below. 
 ------------------------------------------ 
 
 HEALTH HAZARD INFORMATION 
 
 Acute Health Effects 
 
 The following acute (short-term) health effects may occur 
 immediately or shortly after exposure to Antimony Pentachloride: 
 
 *    Exposure can cause sore throat and airway irritation, with 
      cough. Nausea and metallic taste may occur. Higher levels can 
      cause fluid to build up in the lungs, a medical emergency, and 
      may make the heart beat irregularly or stop. 
 *    Contact can burn the skin or eyes. Rash may also occur. 
 Chronic Health Effects 
 
 The following chronic (long-term) health effects can occur at some 
 time after exposure to Antimony Pentachloride and can last for 
 months or years: 
 
 Cancer Hazard 
 *    According to the information presently available to the New 
      Jersey Department of Health, Antimony Pentachloride has not 
      been tested for its ability to cause cancer in animals. 
      Reproductive Hazard 
 *    According to the information presently available to the New 
      Jersey Department of Health, Antimony Pentachloride has not 
      been tested for its ability to adversely affect reproduction.  
 
 Other Long-Term Effects 
 *    Repeated exposure can cause headache, poor appetite, dry 
      throat an loss of sleep. Damage to the liver and heart muscle 
      may also occur, especially with frequent or higher exposure. 
 *    Very irritating substances may affect the lungs. It is not 
      known whether Antimony Pentachloride causes lung damage. 
 
 MEDICAL 
 
 Medical Testing 
 For those with frequent or potentially high exposure (half the TLV 
 or greater, or significant skin contact), the following are 
 recommended before beginning work and at regular times after that: 
 
 *    Urine test for Antimony. 
 *    Consider lung function tests. 
 
 If symptoms develop or overexposure is suspected, the following may 
 be useful: 
 
 *    EKG. 
 *    Liver function tests. 
 *    Consider chest x-ray after acute over-exposure. 
 
 Any evaluation should include a careful history of past and present 
 symptoms with an exam. Medical tests that look for damage already 
 done are not a substitute for controlling exposure. Request copies 
 of your medical testing. You have a legal right to this information 
 under OSHA 1910.20.  
 
 Mixed Exposures 
 *    Use of Antimony Pentachloride near acid can release a deadly 
      gas, Stibine.  
 *    Because smoking can cause heart disease, as well as lung 
      cancer, emphysema and other respiratory problems, it may 
      worsen respiratory conditions caused by chemical exposure. 
      Even if you have smoked for a long time, stopping now will 
      reduce your risk of developing health problems. 
 
 WORKPLACE CONTROLS AND PRACTICES 
 
 Unless a less toxic chemical can be substituted for a hazardous 
 substance, ENGINEERING CONTROLS are the most effective way of 
 reducing exposure. The best protection is to enclose operations 
 and/or provide local exhaust ventilation at the site of chemical 
 release. Isolating operations can also reduce exposure. Using 
 respirators or protective equipment is less effective than the 
 controls mentioned above, but is sometimes necessary. 
 
 In evaluating the controls present in your workplace, consider: (1) 
 how hazardous the substance is, (2) how much of the substance is 
 released into the workplace and (3) whether harmful skin or eye 
 contact could occur. Special controls should be in place for highly 
 toxic chemicals or when significant skin, eye, or breathing 
 exposures are possible. 
 
 In addition, the following controls are recommended: 
 
 *    Where possible, automatically pump liquid Antimony 
      Pentachloride from drums or other storage containers to 
      process containers. 
 *    Specific engineering controls are recommended for this 
      chemical by NIOSH Refer to the NIOSH criteria document: 
      Antimony #78-216. 
 
 
 Good WORK PRACTICES can help to reduce hazardous exposures. The 
 following work practices are recommended: 
 
 *    Workers whose clothing has been contaminated by Antimony 
      Pentachloride should change into clean clothing promptly. 
 *    Contaminated work clothes should be laundered by individuals 
      who have been informed of the hazards of exposure to Antimony 
      Pentachloride. 
 *    Eye wash fountains should be provided in the immediate work 
      area for emergency use. 
 *    If there is the possibility of skin exposure, emergency shower 
      facilities should be provided. 
 *    On skin contact with Antimony Pentachloride, immediately wash 
      or shower to remove the chemical. 
 *    Do not eat, smoke, or drink where Antimony Pentachloride is 
      handled, processed, or stored, since the chemical can be 
      swallowed. Wash hands carefully before eating or smoking. 
 
 
 PERSONAL PROTECTIVE EQUIPMENT 
 
 WORKPLACE CONTROLS ARE BETTER THAN PERSONAL PROTECTIVE EQUIPMENT. 
 However, for some jobs (such as outside work, confined space entry, 
 jobs done only once in a while, or jobs done while workplace 
 controls are being installed), personal protective equipment may be 
 appropriate. 
 
 The following recommendations are only guidelines and may not apply 
 to every situation. 
 
 Clothing 
 *    Avoid skin contact with Antimony Pentachloride. Wear 
      protective gloves and clothing. Safety equipment suppliers/ 
      manufacturers can provide recommendations on the most 
      protective glove/ clothing material for your operation. 
 *    All protective clothing (suits, gloves, footwear, headgear) 
      should be clean, available each day and put on before work. 
 
 Eye Protection 
 *    Wear splash-proof chemical goggles and face shield when 
      working with liquid Antimony Pentachloride, unless full 
      facepiece respiratory protection is worn. 
 
 Respiratory Protection 
 *    IMPROPER USE OF RESPIRATORS IS DANGEROUS. Such equipment 
      should only be used if the employer has a written program that 
      takes into account workplace conditions, requirements for 
      worker training, respirator fit testing and medical exams, as 
      described in OSHA 1910.134. 
 
 *    Where the potential exists for exposures over 0.5 mg/m3, use 
      a MSHA/NIOSH approved supplied-air respirator with a full 
      facepiece operated in the positive pressure mode or with a 
      full facepiece, hood, or helmet in the continuous flow mode, 
      or use a MSHA/NIOSH approved self-contained breathing 
      apparatus with a full facepiece operated in pressure-demand or 
      other positive pressure mode. 
 *    Exposure to 80 mg/m3 is immediately dangerous to life and 
      health. If the possibility of exposures above 80 mg/m3 exists, 
      use a MSHA/NIOSH approved self-contained breathing apparatus 
      with a full facepiece operated in continuous flow or other 
      positive pressure mode. 
 
 Common Name: Antimony Pentachloride 
 DOT Number: UN 1730 (Liquid)/UN 1731 (Solutions) 
 DOT Emergency Guide code: 60 
 CAS Number: 7647-18-9 
 
 ----------------------------------------  
 NJ DOH Hazard rating 
 FLAMMABILITY                        0 
 REACTIVITY                          1 
 ---------------------------------------- 
 does not burn 
 POISONOUS GASES ARE PRODUCED IN FIRE  
 corrosive 
 ----------------------------------------  
 Hazard Rating Key: 0=minimal; 1=slight; 2=moderate; 3=serious; 
 4=severe 
 
 FIRE HAZARDS 
 *    Extinguish fire using an agent suitable for type of 
      surrounding fire. Antimony Pentachloride itself does not burn. 
 *    POISONOUS GASES ARE PRODUCED IN FIRE, including Chlorine. 
 *    If employees are expected to fight fires, they must be trained 
      and equipped as stated in OSHA 1910.156. 
 
 SPILLS AND EMERGENCIES 
 
 If Antimony Pentachloride is spilled or leaked, take the following 
 steps: 
 
 *    Restrict persons not wearing protective equipment from area of 
      spill or leak until clean-up is complete. 
 *    Ventilate the area of spill or leak. 
 *    Absorb liquids in vermiculite, dry sand, earth, or a similar 
      material and deposit in sealed containers. 
 *    It may be necessary to contain and dispose of Antimony 
      Pentachloride as a HAZARDOUS WASTE. Contact your state 
      Department of Environmental Protection (DEP) or your regional 
      office of the federal Environmental Protection Agency (EPA) 
      for specific recommendations. 
 
 ==========================================  
 FOR LARGE SPILLS AND FIRES immediately call your fire department. 
 ========================================== 
 
 HANDLING AND STORAGE 
 
 *    Prior to working with Antimony Pentachloride you should be 
      trained on its proper handling and storage. 
 *    Antimony Pentachloride must be stored to avoid contact with 
      ORGANIC or COMBUSTIBLE MATERIALS (such as WOOD, PAPER and OIL) 
      since violent reactions occur. 
 *    Store in tightly closed containers in a cool, well-ventilated 
      area away from WATER or MOISTURE and HEAT. 
 
 FIRST AID 
 
 Eye Contact 
 *    Immediately flush with large amounts of water for at least 15 
      minutes, occasionally lifting upper and lower lids. Seek 
      medical attention immediately. 
 
 Skin Contact 
 *    Quickly remove contaminated clothing. Immediately wash 
      contaminated skin with large amounts of water. 
 
 Breathing 
 *    Remove the person from exposure. 
 *    Begin rescue breathing if breathing has stopped and CPR if 
      heart action has stopped. 
 *    Transfer promptly to a medical facility. Medical observation 
      for 1 to 2 days is recommended after overexposure, as lung and 
      other effects may be delayed.  
 PHYSICAL DATA 
 Vapor Pressure:     1 mm Hg at 73oF 
 Water Solubility:   Reacts with Water 
 
 OTHER COMMONLY USED NAMES 
 
 Chemical Name: 
 Antimony Chloride (SbCl5)  
 
 Other Names and Formulations:  
 Antimony(V) Chloride. 
 
 ------------------------------------------  
 Not intended to be copied and sold for commercial purposes. 
 ------------------------------------------ 
 
 NEW JERSEY DEPARTMENT OF HEALTH 
 Right to Know Program 
 CN 368, Trenton, NJ 08625-0368 
 (609) 984-2202 
 ------------------------------------------  
 ------------------------------------------ 
 
 ECOLOGICAL INFORMATION 
 
 Antimony is an element which occurs naturally in the environment as 
 a component of certain minerals.  As antimony oxide, it is added to 
 various materials as a flame retardant.  Antimony may occur in the 
 aquatic environment from natural weathering of mineral formations, 
 from mining and manufacturing effluents, and from municipal wastes. 
 
 ACUTE (SHORT-TERM) ECOLOGICAL EFFECTS 
 
 Acute toxic effects may include the death of animals, birds, or 
 fish, and death or low growth rate in plants.  Acute effects are 
 seen two to four days after animals or plants come in contact with 
 a toxic chemical substance. 
 
 Antimony has high acute toxicity to aquatic life.  No data are 
 available on the short-term effects of antimony to plants, birds, 
 or land animals. 
 
 CHRONIC (LONG-TERM) ECOLOGICAL EFFECTS 
 
 Chronic toxic effects may include shortened lifespan, reproductive 
 problems, lower fertility, and changes in appearance or behavior.  
 Chronic effects can be seen long after first exposure(s) to a toxic 
 chemical. 
 
 Antimony has high chronic toxicity to aquatic life.  No data are 
 available on the long-term effects of antimony to plants, birds, or 
 land animals. 
 
 WATER SOLUBILITY 
 Antimony and its salts have solubilities in water ranging from low 
 to high. 
 
 DISTRIBUTION AND PERSISTENCE IN THE ENVIRONMENT 
 
 Antimony is highly persistent in water with a half-life of longer 
 than 200 days.  The half-life of a pollutant is the amount of time 
 it takes for one-half of the chemical to be degraded.  
 
 BIOACCUMULATION IN AQUATIC ORGANISMS 
 
 Some substances increase in concentration, or bioaccumulate, in 
 living organisms as they breathe contaminated air, drink 
 contaminated water, or eat contaminated food.  These chemicals can 
 become concentrated in the tissues and internal organs of animals 
 and humans. 
 
 The concentration of antimony found in fish tissues is expected to 
 be about the same as the average concentration of antimony in the 
 water from which the fish was taken. 
 
 SUPPORT DOCUMENT:  AQUIRE Database, ERL-Duluth, U.S. EPA. 
 
 
 
....................................................................
[an error occurred while processing this directive]